홈 > 제품정보 > GS-HRG 800/1000
 
 
MODEL GS-HRG 800 GS-HRG 1000
Capability Swing capacity inside water guard 900 900
Magnetic chuck diameter 800 800
Vertical range 300 300
Table Chuck rotation 0~90 0~90
Tilt angle of chuck 5˚(Special) 5˚(Special)
System
Specifications		 Table vertical traverse 330

330
Manual feed 0.01 0.01
Automatic feed 0.001~0.3 0.001~0.3
Table vertical rapid traverse rate 300mm/min 300mm/min
Grinding Wheel Grinding wheel size Ø501 x 50 x 203.2 Ø510 x 50 x 203.2
Rotation speed 1250 1250
Wheel Head Peripheral speed of wheel 1990m/min 1990m/min
Head horizontal traverse 450 450
Traverse rate 50~2000mm/min 50~2000mm/min
Motor Grinding wheel 15kW 4P 15kW 4P
Hydraulic unit 1.5kW 1.5kW
Vertical traverse AC Servo 1.5kW AC Servo 1.5kW
Chuck rotation gear motor 2.2kW 2.2kW
Lubrication (Table) 0.1kW 0.1kW
Lubrication (RAM) 0.1kW 0.1kW
Coolant separator 0.2kW 0.2kW
Magnetic separator 0.025kW 0.025kW
* Specifications and structure may change without notice.
 
 
Table and table holder
  The table, which is designed with an oil-pressure thrust bearing, rotates according to oil pressure, and koops consistent density and operation.
Table elevation
  The movement of the table, up, down and straight, keeps its exact position and automatic precision because it employs an LM system and a Servo Notor.
Bad
  Strong heavy grinding is characteristic of the product, and the surface operates by oil film, so it is semi-permanent and very durable.
Spindle
  The spindle employs a super-precise bearing with a grade of P4. Designed to adjust according to its weight and strength, it keeps a consistent density.
Ram
  The product operates by oil-pressure cylinders, a new-concept technology controlling electronic proportional sides.
Control panel
  The product is wholly centralized for efficiency and convenience.
Dresser
  The product guarantees convenient operation because the dresser, which is attached to the spindle, operates in an oil-pressure system.